YJTG Series Invert-Fed Speed Adjustable Three Phase Asynchronous Induction Motor
YJTG Series Invert-Fed Speed Adjustable Three Phase Asynchronous Induction Motor
Power: 0.55kw - 315KW
Voltage: 380V
Speed: 600RPM/750RPM/1000RPM/1500RPM/3000RPM
Poles: 2/4/6/8/10 poles
Protection Degree: IP44/IP54
Cooling method: IC416
Insulation Class: F
Duty: S1
Package: Export Wooden Package
Payment: 30% in advance, balance by T/T or L/C at sight.
- product description
- Technical Parameters
- outline dimensional drawing
Description and Application
YJTG series variable-frequency adjustable-speed asynchronous motor is the new generation of variable-frequency adjustable-speed motor, which is developed base on the YJT variable-frequency adjustable-speed motor. In the aspect of electromagnetism design, we adjust the rotor slots, the winding pattern, and the connection, so that the motor enable to be supplied by the transducer power source. Meanwhile, the design could guarantee the overload capacity of the motor when high frequency and it could maintain the same with Y series motor, besides the length size, other dimensions is also same as Y series motor, This series motor is forced ventilation with the independent axial flow ventilator, which guaranteed that the motor has good cooling performance in the entire frequency range and the temperature rise is not over that rating.
The speed modulation system consisted of YJTG series variable-frequency adjustable speed 3 phase asynchronous motor and the frequency conversion installing, compares with other speed modulation way, the energy conservation effect is remarkable, the speed modulation performance is good, the governor deflection is broad, the noise is low, the vibration is less, this motor can widely apply in the light industry, the spinning and weaving, the chemical industry, the metallurgy, machine tool which need permanent torque or adjust speed at the permanent power and the air blower, the water pump which need energy saving speed modulation. It is helpful in developing automated control of the speed modulation system.
The 4 poles motor of YJTG series electric motor conform to JB/T7118-2004 "the specification of the speed modulation system. Conversion variable speed motor and power sources condition" and for other number of poles of electric motor conforms to IEC34-1 and GB/T755.
Type of Meaning
Example:YJTG200L1-6
YJTG state for: Type of motor
200 state for: Center Height
L state for: Frame Size
1 state for: Core Length
6 state for: Number of Pole
Working Condition
1. Ambient Working Temperature: Ambient temperature varying with seasons should be between 40℃ and -15℃.
2. Altitude: Not over 1000m above sea level.
3. The average relative humidity in the most moisture month is 90%. And meanwhile, the average lowest temperature should not be over 25℃.
4. Termination: Y(star) connection below Frame 280. ▲(delta) connection for Frame H315-H355..
5. Operation Mode(duty): S1.
Motor Construction
1. Protection Degree: IP44/IP54
2. Cooling Method: IC416
3. It can carry high resolution sensor(the electro-optical encoder, the rotary transformer and tachogenerator) according to customer's requirement.
4. It can carry magnetic brake(both circulation and lose electric brake is ok), gearspeed reducer, etc.
5. Standard terminal box mounting is on the right hand side seen from the shaft end of the motor. As an alternative, mounting at the top or on the left hand side is possible on request.
Mounting Type
Frame Size(H80-H160): IM B3, B5, B35, V1, B6, B7, V3,V5, V6, V15, etc.
Frame Size(H180-H280): IM B3, B5, B35, V1.
Frame Size(H315-H355): IM B3, B35, V1
